Steering Riser Bracket: 1" for Jeep Wrangler TJ (1997-06)
This bracket will raise the steering pillow block to get rid of the annoying bump feel that occurs with the 1" & 1-1/4" body lifts. Same bracket that we use in our TJ body lift kits (BLTJ97). Available for 4.0L (6 cylinder) or 2.5L (4 cylinder).
Steering Brace for Jeep Wrangler TJ (2003-06) / LJ (2004-06)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Brace for Jeep Wrangler TJ (1997-02)
M.O.R.E.'s steering brace is powder coated and the clamp is zinc plated. All mounting hardware is included, and the steering box brace is just a simple bolt-on design. No drilling or mods are required (for most applications). This brace ties your power steering box to the passenger frame...
Steering Box Clamp
If you want to fabricate your own Steering Brace, then you can purchase a M.O.R.E. Steering Box Clamp. Zinc Plated (clamp and hardware only)
Rod End: 5/8" -18 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 5/8" -18 Right Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Left Hand Thread with 5/8" Hole in Ball (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Left Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Right Hand Thread with 5/8" Hole in Ball (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
Rod End: 3/4" -16 Right Hand Thread (Heim Joint)
Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...
5/8 Rod End Spacer
Spacers provide room between the heim joint and mounting surface to allow the heim its full range of travel. Required in most heim joint applications, spacers prevent heim joint from binding against mount surfaces and damaging the components. Spacers can also be used to adjust the clearance between...
Tube End 3/4"-16 Right Hand Thread
Tube End 3/4"-16 Right Hand Thread (Use 1-1/4"x .188 tubing)