Jeep Wrangler TJ

M.O.R.E. stocks the special yoke needed to adapt the Ford 8.8 rear axle pinion flange with a 3 inch center to center bolt pattern to the stock Jeep XJ, YJ, or TJ (1310 series) U-joint. This bolts on the Ford flange and allows you to install your XJ,...

Fits 3-1/4" axle diameter. These weld on spring mounts are 2.5" wide, 7" long (anti-wrap design). They have three holes cut on 1" centers for adjustability of the leaf spring so you can place the axle where you want to. Manufactured in Colorado, laser cut and CNC formed...

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

These lug nuts are for our M.O.R.E. Wheel Spacer WS5450.

Have you installed a Ford 8.8 rear axle (disc brake) in your Jeep TJ and need to have the correct cables for the emergency brake? We have the correct cables in stock! The quality is outstanding and they are very rugged, ready for your off-road abuse. Sold in...

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

OD of flange 2.715 OD of main diameter 2.284 ID of thru bore .587 Length of thru bore of ID 2.618

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

Want to build your own tie rods, trac bars, radius arms, or link bars, or whatever and need the rod ends (known as Heim Joints) to perform the task? These are super high quality, 52100 bearing steel ball, Teflon® / Kevlar® self-lubricating race, and have a alloy steel...

All universal bushing assemblies come complete with two polyurethane bushing halves, outer steel tubing, inner sleeve, mounting bolt and locking nut. Available only in black polyurethane! These universal bushing assemblies are handy for the home fabricator. For varied applications such as custom motor mounts (same as used in...

This sway bar bracket fits all 3-1/4" diameter axles and is 3/16" thick plate, laser cut, and CNC formed. This is the same bracket out of our Ford 8.8 install kit for those of you who want to make your own axle design. Sold in pairs. Fits 1997-06...